Title: Putting Ham Radio and ADS-B Together with PuTTY Software

The world of ham radio and ADS-B (Automatic Dependent Surveillance-Broadcast) can be a fascinating combination for enthusiasts and hobbyists alike. In this article, we will explore how you can use the PuTTY software to connect your ham radio equipment to an ADS-B receiver and start decoding signals.

Getting Started with PuTTY

To get started with using PuTTY, you will need a hardware TNC (Terminal Node Controller) connected to your computer via a serial interface. A popular choice for this is the RS-41, which can be configured to work with the 70 cm radio amateur band. Once you have your TNC set up, you can use PuTTY as a serial terminal to connect to the device and start transmitting and receiving signals.

Configuring Your ADS-B Receiver

In addition to using PuTTY for your ham radio equipment, you will also need an ADS-B receiver connected to your computer via Wi-Fi or Ethernet. For this article, we will assume that you are using a Raspberry Pi-based ADS-B receiver with the piaware software installed. To configure your ADS-B receiver, you can follow the steps outlined in the QuickStart Guide for piaware.

Feeding Your ADS-B Data

Once you have your ADS-B receiver set up and configured, you can start feeding your data to various ADS-B feeder sites. For this article, we will focus on feeding data to FlightAware, which is one of the most popular ADS-B feeder sites online.

Comparison of FlightAware and Flight24

For those new to the world of ADS-B and ham radio, it may be helpful to understand the differences between FlightAware and Flight24, two of the most popular ADS-B feeder sites online. While both sites offer similar services, they have some key differences in terms of user experience and data processing.

In conclusion, using PuTTY software with your ham radio equipment and ADS-B receiver can be a fun and rewarding hobby for enthusiasts and hobbyists alike. With the right hardware and software setup, you can start decoding signals and feeding your data to various ADS-B feeder sites online. Whether you are just starting out or have experience with these technologies, this article should provide a helpful guide for getting started with PuTTY software and ham radio.

Putty software ham radio